Looking for:
QAS | State of California - Department of Justice - Office of the Attorney General.Stack-on QAS Manuals | ManualsLib |
- Robot or human?
Close the door and push the latch up to lock the door. Enter your new combination and the green light will go on. Push the latch down to. If the combination is entered incorrectly the yellow light will flash. If the combination is entered incorrectly 3 consecutive times the. If the incorrect combination is entered an additional 3 times the keypad will lock out.
You can turn off or on the "Beep" sound of the keypad by pressing two buttons that are at. This safe has a mounting plate which allows you to remove the safe. First remove the. Mount the plate in the desired location using the appropriate hardware. Slide the safe on the mounting plate and tighten the internal thumb screw.
The safe can also be mounted permanently using the 4 top or bottom mounting holes. Remove the top hole plugs by pushing them out from the inside of the safe. Mount the. Use the. Reinstall the hole plugs in the top if the. Keep your combination number and keys in a secure place, away from children. Keep this record of your serial number and. You will need the serial number as a reference for obtaining.
To order a replacement key set, follow the instructions on the attached form. Previous Page. Hide thumbs. Table Of Contents. Available languages. Quick Links Download this manual. Table of Contents. Simplified version. Model No. Record the serial number from the tag on the back of.
Record your combination. Keep keys and combination in a secure place away. You will need to use the key to open the safe the first. At a later time.
Remove the lock cover plate. Insert the key and. Push down the latch and the. NOTE: Do not mix old and new batteries. Do not. You can only enter your code while the yellow light is on. With the door open and the yellow light on, enter your own personal security code, which can be 3 - 8 digits long, and confirm your new code by pressing the " " symbol on the electronic touch pad. Before you close the door, try the new security code to make sure the lock releases the handle so you can turn it and retract the live action bolts.
If the code fails, go through steps 1 and 2 again. If the code works successfully record your combination number on the front of this form or somewhere in your records, then you should lock the safe. When you open the safe in the future enter the security code you have set followed by the " " symbol. If the incorrect security code is entered 3 times you will have an automatic lockout for 20 seconds before you can try your code again.
If the incorrect security code is entered 3 additional times there will be a 5-minute lockout before the code can be tried again. You can turn off the "Beep" sound of the keypad by entering the code To turn the "Beep" sound on, enter the code NOTE: When changing the battery, always hold the battery connecting cap while disconnecting or attaching the battery.
Do not pull on the wires. Doing this could cause the power supply to become disconnected from the lock. This safe uses one 9V alkaline battery. Under normal use, batteries will last about 1 year. When the battery is low and you press a button on the keypad, a red light will come on warning you that the battery is low. To test the batteries, enter your security code.
If the batteries are low the red light will come on momentarily. To replace the battery, remove the cover by pressing the tab and turning the cover as shown in the illustration. Replace the old battery and screw the cover back in place.
A "Trouble Key" has been provided in case you have forgotten or lost your security code. To open the safe using the trouble key follow the steps below:. Remove the cover by pressing the tab and turning the cover as shown in the illustration. The lock can hang by the connecting cable while unlocking the safe. Rotate the handle and open the door. Keep the door open until you have entered a new security code. Before entering your new code, remove the key and screw the cover back in place. Enter your new security code following the instructions at the top of the page.
Keep keys and combination number in a secure place, away from children. Keep this record of your key number and combination in a secure place separate from your safe. To order a replacement key set, follow the instructions on the attached form. Storing your Key or Combination will provide instant your keys or your combination. Verification of ownership is required in order to receive replacement key for your security product.
No comments:
Post a Comment